Microfiltration

What is MicroFiltration

The principle of microfiltration as with Ultrafiltration, is physical separation.   The level to which dissolved solids, turbidity and micro-organisms are removed is determined by the size of the pores in the membranes.

Microfiltration, (MF) is typically used for turbidity reduction, removal of suspended solids, giardia and cryptosporidium.

The process

Liquid is passed through a membrane (pore sizes between 0.1 – 10µm), separating micro organisms and suspended particles from the process liquid removing all bacteria.  Micro filtration is generally operated in the crossflow as well as the dead end mode.  In cross flow the raw solution flows along the membrane surface with only a small portion of the liquid passing through the membrane as a permeate. The concentrate is circulated in a loop to reduce concentration polarisation continuously and is used to clean the membrane. For this reason, cross-flow filtration is preferably applied for the filtration of liquids with a high solids concentration.

In dead-end filtration, the liquid flows perpendicular to the membrane surface so that the retained particles accumulate at the membrane surface and form a filter cake. The filter cake increases in height throughout the filtration period resulting in a decrease in permeate flux. Therefore the membranes in dead-end operations have to be cleaned at regular intervals either by backflushing or possibly by using chemical or mechanical cleaning methods.

 

The process fills the gap between ultrafiltration and granular media filtration.

Microfiltration

Benefits of Microfiltration

  • It does not use additional cleaning chemicals
  • Low operational costs
  • High flow throughput and dry concentrate
  • Pressure bar <4
  • Sterile process

Products available include the PureFlow CrossFlow

Crossflow

Envirogen Water Technologies